Metal Eyeleted Flat Gasket SWG817

SWG817 Metal Eyeleted Flat Gasket  is cut from pure graphite sheet or graphite sheet with metal reinforcement, features excellent corrosion-resistance, high-and-low temperature resistance, good compression resilient and high internsity it can be used as sealing elements of pipe, valve, pump, pressure vessel, heat exchanger and condenser, etc. Other complex gaskets such as water gauge gasket and flange gasket with bolt holes are available.

Metal Eyeleted Flat Gasket IE-Reinforced Gasket with inner Eyelet IO-Reinforced Gasket with inner &outer Eyelets   Metal eyeleted gaskets(MEG)make better than pure cut gaskets, it remains properties of cut gaskets,the matal eyelet can offer special protection against blowout and chemical attack,also improve seal-ability due to the local higher stress under eyelet.the metal eyelet material is normally ss304 or 316,pressure6.4-10Mpa. Style of cut gasket:G+code of gasket sheet IO -Tanged metal reinforced graphite gasket with inner &outer eyelets   IE-Metal foil reinforced graphite gasket with inner eyelet

 Thickness : 1.5mm, 2.0mm, 3.0mm, 4.5mm